//Charcoal Hearth // // I've made some improvements to the Hearth macro. Depending on your resolution, // the macro will run up to 12 guilded hearths. I've tested it in 1280x960 // resolution without any need to change values. It may work in other resolutions // also but I have not been able to test it. If you are using personal hearths, // it will run up to 10 in 1280x960. Maximum number in 1024x768 is 8. // // Setup: I've added a setup routine to the macro. Pin the windows on top of each // other in the top left corner. I suggest at least 200 wood per hearth // and about 15 water per hearth to be safe. All hearths are slightly // different but I suggest that you put your fastest burning hearths first // in line. You can tweak the settings in the built in menu. // // Hearths: Total number of hearths you are running. // Hearths Across: How many Hearths on the top row of windows. Make sure // you set this each time even if you are running 1 hearth. // Variables in the macro are set off of this number. // Guilded?: Check this box if you are using guilded hearths. // Need Setup?: Check this box if you need the macro to position your // windows that are stacked in top left corner. This is // usefull if you run another round on the hearths and your // windows are set up already. Check if needed or not. // Stealth Mouse: Check this if you don't want to see the mouse move around // on the hearth windows. When checked, it will save your // mouse position, move to the spot it needs, perform its // action then return the pointer to where it started. Alows // you to change chat windows are dig in chest while the // macro is running :) // Heat: Threshold for Heat bar, increase or decrease as needed. If heat // reaches this lvl, water will be added. // Wood: Wood threshold, adds wood up to this point. // Water: Alowable water level, not much play here. If the water lvl is above // this lvl, water will not be added. Prevents drowning the hearth. // RGBGreen: Used to detect completion bar. If the macro adds a bunch of water // before the macro is done then moves to the next hearth, increase // this number. Or lower it if it doesnt see green. // RGBBlue: Works just like RGBGreen but for blue bars. If the macro keeps // adding wood till the hearth is full, it's not seeing blue. If // this happens, lower this number. Other problem may be that the // mouse pointer is not lining up over the bar correctly. Run the // Mouse Test. // Check Bars Interval: This is the pause time between bar checks. The // default value of 4000 works well for 1-8 hearths // but you may need to decrease this number if you // are running more than 8. // Mouse Test: This is to test if the mouse pointer is lining up correctly // with your windows. Run 1 hearth manually and start the macro // with this option checked. You don't need to worry about any // other option. It will move over the Heat, Wood, Water, Danger, // and Status bar then over the Wood and Water buttons 10 times // before it stops. If these positions are off a bit, you can // change the Y coordinates below in the constants section. // // The macro doesn't watch Oxygen. I was going to add a vent option but this // macro runs very well and never fails for me. If your oxygen is getting too // high, try adding more wood. But, by adding more wood, you add more heat // which may require you adding more water. A small amount of water in the // presence of heat evaporates producing more Oxygen. :) Find the balance // you want. // // ENJOY! :) Come visit me in LE :) 780, 6956 I have a large bar with tasting // tables and hookahs. // Anka // Constants //User Definable variables Hearths = 4 HeatX = 165 WoodX = 107 WaterX = 76 DangerX = 165 RGBBlue = 220 RGBGreen = 240 Guild = 1 // Y Coordinates - Don't change unless you are having a problem. RegY = 74 // Y coord for Regulator button BeginY = 245 // Y coord for Begin Button HeatY = 156 // Y coord for Heat Bar WoodY = 180 // Y coord for Wood Bar WaterY = 192 // Y coord for Water Bar DangerY = 204 // Y coord for Danger Bar StatusY = 216 // Y coord for Status Bar WoodBY = 250 // Y coord for Wood and Water buttons //End User variables Hrow = 0 Hrow1 = 0 AddX = 226 Add2X = 15 Add1Y = 65 Add2Y = 17 Add3Y = 250 RegX = 47 BeginX = 111 NewX = 0 New2X = 0 New2Y = 0 NewY = 0 Heat = 0 Wood = 0 Water = 0 Danger = 0 Status = 0 OxyY = 168 StatusX = 167 WoodBX = 35 WaterBX = 85 Num = 0 Jump = 5 JumpM = 0 Jumped = 0 Used = 0 MDelay = 250 SDelay = 200 S1Delay = 100 Count = 0 CountM = 0 MouseX = 0 MouseY = 0 CheckDelay = 0 Setup = 0 SetX = 10 SetY = 40 SetAddX = 227 SetAddY = 250 SetLoop = 0 Mouse = 1 OrigX = 0 OrigY = 0 End Form ccHearth, Settings ed1=Combobox:Hearths:1, 2, 3, 4, 5, 6, 7, 8, 9, 10, 11, 12 ed13=Editbox:Hearths Across:4 ed2=CheckBox:Guilded?:True ed14=Checkbox:Need Setup?:True ed15=Checkbox:Stealth Mouse:True ed3=Editbox:Heat (75-188):165 //ed10=Editbox:HeatMin (75-188):116 //ed11=Editbox:HeatMax (75-188):184 //ed4=Editbox:Low Oxy (75-188):82 //ed5=Editbox:High Oxy (75-188):134 ed6=Editbox:Wood (75-188):107 ed7=Editbox:Water (75-188):76 ed8=Editbox:RGBGreen:240 ed9=Editbox:RGBBlue:220 ed12=Editbox:Check Bars Interval (miliseconds):4000 ed16=Checkbox:Mouse Check:False end FormLoad ccHearth, ccHearth.frm if ShowForm ccHearth SetConst Hearths = ccHearth[ed1] If ccHearth[ed2] = True SetConst Guild = 1 Else SetConst Guild = 0 End SetConst HeatX = ccHearth[ed3] //SetConst Oxy1X = ccHearth[ed4] //SetConst Oxy2X = ccHearth[ed5] SetConst WoodX = ccHearth[ed6] SetConst WaterX = ccHearth[ed7] SetConst RGBGreen = ccHearth[ed8] SetConst RGBBlue = ccHearth[ed9] //SetConst HeatMin = ccHearth[ed10] //SetConst HeatMax = ccHearth[ed11] SetConst CheckDelay = ccHearth[ed12] Set HRow = ccHearth[ed13] Compute SetLoop = $Hearths - 1 Compute HRow1 = $Hrow + 1 If ccHearth[ed15] = True Set Mouse = 0 End else Stop end FormSave ccHearth, ccHearth.frm MousePos 100, 20 //Activates eGenesis window.. Don't run ACTool maximized. Delay $MDelay LeftClick Delay 2000 If $Guild = 1 Call Guild End if ccHearth[ed16] = True Call HearthTest End If ccHearth[ed14] = True Call Setup End Call SetReg SetConst NewX = $BeginX SetConst NewY = $BeginY SetConst Count = 1 Loop $Hearths If $Count = $HRow1 //$Jump SetConst NewX = $BeginX Compute NewY = $BeginY + $Add3Y End MousePos $NewX, $NewY Delay $MDelay Rightclick Delay $MDelay Compute NewX = $NewX + $AddX Compute Count = $Count + 1 End SetConst NewX = $BeginX //Dont remember why this is here :) Call Main Procedure Setup Set NewX = $SetX Set NewY = $SetY Loop $SetLoop Mousepos $SetX, $SetY if {loopno} = $HRow Set NewX = $SetX Compute NewY = $SetY + $SetAddY else Compute NewX = $NewX + $SetAddX End Dragto $NewX, $NewY End End Procedure Main SetConst CountM = 1 SetConst Status = 0 Compute JumpM = $HRow1 - 1 //$Jump - 1 Loop $Hearths If $CountM = $HRow1 //$Jump // may have to use New Newx and newy variables in Main SetConst NewX = $StatusX Compute NewY = $StatusY + $Add3Y SetConst New2X = $WaterBX Compute New2Y = $WoodBY + $Add3Y End While $Status = 0 Call CheckBars If $Status = 1 Call Snuff //code to advance to next hearth Compute Used = $Used + 1 If $Used = $JumpM Compute HeatX = $HeatX - (($Used - 1) * $AddX) Compute HeatY = $HeatY + $Add3Y Compute WoodX = $WoodX - (($Used - 1) * $AddX) Compute WoodY = $WoodY + $Add3Y Compute WaterX = $WaterX - (($Used - 1) * $AddX) Compute WaterY = $WaterY + $Add3Y Compute DangerX = $DangerX - (($Used - 1) * $AddX) Compute DangerY = $DangerY + $Add3Y Compute StatusX = $StatusX - (($Used - 1) * $AddX) Compute StatusY = $StatusY + $Add3Y //Compute WaterBX = $WaterBX - (($Used -1) * $AddX) //Compute WoodBX = $WoodBX - (($Used - 1 ) * $AddX) //Compute WoodBY = $WoodBY + $Add3Y SetConst Jumped = 1 Continue Else Compute HeatX = $HeatX + $AddX Compute WoodX = $WoodX + $AddX Compute WaterX = $WaterX + $AddX Compute DangerX = $DangerX + $AddX Compute StatusX = $StatusX + $AddX //Compute WaterBX = $WaterBX + $AddX //Compute WoodBX = $WoodBX + $AddX End Continue End If $Heat = 0 and $Danger = 0 and $Wood = 0 Call Wood Else If $Heat = 1 or $Danger = 1 If $Water = 0 Call Water End End End Delay $CheckDelay End Compute CountM = $CountM + 1 SetConst Status = 0 End End Procedure CheckBars If $Mouse = 1 MousePos $HeatX, $HeatY Delay $SDelay end LoadRGB $HeatX, $HeatY if {RGBBlue} > $RGBBlue SetConst Heat = 1 Else SetConst Heat = 0 End If $Mouse = 1 MousePos $WoodX, $WoodY Delay $S1Delay end LoadRGB $WoodX, $WoodY if {RGBBlue} > $RGBBlue SetConst Wood = 1 Else SetConst Wood = 0 End If $Mouse = 1 MousePos $WaterX, $WaterY Delay $S1Delay End LoadRGB $WaterX, $WaterY if {RGBBlue} > $RGBBlue SetConst Water = 1 Else SetConst Water = 0 End If $Mouse = 1 MousePos $DangerX, $DangerY Delay $S1Delay End LoadRGB $DangerX, $DangerY if {RGBBlue} > $RGBBlue SetConst Danger = 1 Else SetConst Danger = 0 End If $Mouse = 1 MousePos $StatusX, $StatusY End LoadRGB $StatusX, $StatusY if {RGBGreen} > $RGBGreen SetConst Status = 1 Else SetConst Status = 0 End End Procedure Water SetConst NewX = $WaterBX SetConst NewY = $WoodBY Loop $Hearths IF {loopno} = $HRow1 //$Jump SetConst NewX = $WaterBX Compute NewY = $WoodBY + $Add3Y End If {loopno} > $Used If $Mouse = 0 Set OrigX = {mousex} Set OrigY = {mousey} End MousePos $NewX, $NewY Delay $SDelay Rightclick Delay $SDelay If $Mouse = 0 Mousepos $OrigX, $OrigY End End Compute NewX = $NewX + $AddX End SetConst NewX = $WaterBX End Procedure Snuff SetConst New2X = $WaterBX SetConst New2Y = $WoodBY Compute Num = $Used + 1 Loop $Hearths IF {loopno} = $Hrow1 //$Jump SetConst New2X = $WaterBX Compute New2Y = $WoodBY + $Add3Y End If {loopno} = $Num If $Mouse = 0 Set OrigX = {mousex} Set OrigY = {mousey} End MousePos $New2X, $New2Y Loop 8 Rightclick End If $Mouse = 0 Mousepos $OrigX, $OrigY End End Compute New2X = $New2X + $AddX End End Procedure Wood SetConst NewX = $WoodBX SetConst NewY = $WoodBY Loop $Hearths IF {loopno} = $HRow1 //$Jump SetConst NewX = $WoodBX Compute NewY = $WoodBY + $Add3Y End If {loopno} > $Used If $Mouse = 0 Set OrigX = {mousex} Set OrigY = {mousey} End MousePos $NewX, $NewY Delay $SDelay Rightclick Delay $SDelay If $Mouse = 0 MousePos $OrigX, $OrigY End End Compute NewX = $NewX + $AddX End SetConst NewX = $WoodBX End Procedure SetReg SetConst NewX = $RegX SetConst Count = 1 Loop $Hearths If $Count = $HRow1 SetConst NewX = $RegX Compute RegY = $RegY + $Add3Y End MousePos $NewX, $RegY Delay $MDelay Rightclick Compute NewX = $NewX + $Add2X If $Count > $HRow Compute NewY = $RegY + $Add2Y else Compute NewY = $RegY + $Add1Y end MousePos $NewX, $NewY Delay $MDelay Rightclick Delay $MDelay Compute NewX = $NewX + $AddX Compute Count = $Count + 1 End SetConst NewX = $RegX SetConst Count = 1 End Procedure Guild Compute BeginX = $BeginX - 7 Compute BeginY = $BeginY + 16 Compute RegY = $RegY + 16 Compute RegX = $RegX - 14 Compute AddX = $AddX - 15 Compute Add3Y = $Add3Y + 16 Compute Add1Y = $Add1Y - 16 Compute WoodBY = $WoodBY + 16 Compute HeatX = $HeatX - 4 Compute HeatY = $HeatY + 16 Compute WoodX = $WoodX - 1 Compute WoodY = $WoodY + 16 Compute WaterY = $WaterY + 16 Compute DangerX = $DangerX - 4 Compute DangerY = $DangerY + 16 Compute StatusX = $StatusX - 5 Compute StatusY = $StatusY + 16 Set SetAddX = 212 Set SetAddY = 266 End Procedure HearthTest Loop 10 MousePos $HeatX, $HeatY Delay 2000 MousePos $WoodX, $WoodY Delay 2000 MousePos $WaterX, $WaterY Delay 2000 MousePos $DangerX, $DangerY Delay 2000 MousePos $StatusX, $StatusY Delay 2000 MousePos $WoodBX, $WoodBY Delay 2000 MousePos $WaterBX, $WoodBY Delay 2000 end Stop End //Written with ACTool 5.3.0 by Anka Bell Asterisk